Standard
Carbon Steel Pipes
Alloy Steel Pipes
Stainless Steel Pipes

Home | About Us | Product | Know How | Contact Us
   
ASTM A530 / A530M Standard Specification for General Requirements for Specialized Carbon and Alloy Steel Pipe
This specification covers a general requirements for specialized carbon and alloy steel pipe. Tensile tests, tension tests, flattening tests, hydrostatic tests and ultrasonic tests shall be made to conform to the requirements specified. If the mechanical results do not conform to the requirements specified, retests shall be made. Defects in seamless pipe shall be repaired by welding.
1. Scope

1.1 This specification covers a group of requirements which, with the exceptions of Section 5.3, Section 13, Section 20, and Section 21, are mandatory requirements to the ASTM pipe product specifications noted below unless the product specification specifies different requirements, in which case the requirement of the product specification shall prevail.

1.2 Sections 5.3 or 20 are mandatory if the product specification has a requirement for product analysis or flattening tests.

1.3 Section 21 is mandatory if the product specification has a hydrostatic test requirement without defining the test parameters.

1.4 Section 13 is for information only.

1.5 In case of conflict between a requirement of the product specification and a requirement of this general requirement specification, only the requirement of the product specification need be satisfied.

2. Referenced Documents

ASTM Standards

A370 Test Methods and Definitions for Mechanical Testing of Steel Products
A450/A450M Specification for General Requirements for Carbon and Low Alloy Steel Tubes
A700 Practices for Packaging, Marking, and Loading Methods for Steel Products for Shipment
A751 Test Methods, Practices, and Terminology for Chemical Analysis of Steel Products
A941 Terminology Relating to Steel, Stainless Steel, Related Alloys, and Ferroalloys
D3951 Practice for Commercial Packaging
E29 Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications

ANSI Standards

B36.19 Stainless Steel Pipe

Military Standards

MIL-STD-792 Identification Marking Requirements for Special Purpose Components

Federal Standards

Fed.Std.No.183 Continuous Identification Marking of Iron and Steel Products

Steel Structures Painting Council

SSPC-SP6 Surface Preparation Specification No. 6 Commercial Blast Cleaning

Index Terms
alloy steel pipe; carbon steel pipe; general delivery requirements; steel pipe; Alloy steel pipe--specifications; Carbon steel pipe--specifications; General delivery requirements--steel; Hydrostatic pressure test;
For more details, please contact us
Home | About Us | Product | Know How | Contact Us
Copyright © TubeMFG. Powered by TubeSolution